Corporate
Profile

Failed to register as Favorite Page
Failed to cancel as Favorite Page
This page is already registered as a Favorite Page
You can't add your company to your favorites.

Latest update: 26/02/2020 10:25:05

Fukasawa Denkou Co., Ltd.

Utilizing our electronic substrate technology, we have entered the field of medical equipment.

We conduct design, assembly and manufacture of electronic equipment centering on printed-circuit boards. We have established a technology of a high variety of difficult mountings including high-density mountings for 0402 sized chips, flexible boards (FPC), and aluminum boards. In the future, companies in the medical and health fields are expected to promote R&D, and local corporations are expected to participate in the same field and grow. Considering this trend, we started to occupy the Project Support and Research Zone of the Fuji Pharma Valley Center in September 2016, set up a medical equipment team in our organization, and are planning to fully enter the medical equipment field.

Inquiry
Main image

Sales Pitch

BGA and CSP high-density part reworking and re-boring, SMD0402 size mounting, and flexible printed circuit (FPC) mounting
Our company possesses BGA reworking machines and conducts reworking at a frequency of about 50 per month. We also possess many metal masks for BGA. We can handle a maximum pitch size of 0.39 mm. The minimum quantity is one and the minimum lead time is one night.
Electronic parts are now becoming more dense and parts are becoming smaller. Our company possesses the latest mounter made by Yamaha, so we support SMD0402 size mounting as well as mounting on flexible printed circuits (FPC).
Our company has an integrated production system from board design to part procurement. We accept orders for even single-unit production or one-night delivery.
Full-scale entry into the medical equipment industry
Our company is a registered medical equipment manufacturer. We can mainly assemble products in the medical equipment class for medical equipment manufacturing and sales businesses (medical equipment manufacturers, etc.).
Our company has acquired Class 2 medical equipment manufacturing and sales business certification. We can manufacture medical equipment ourselves after R&D.
Development and manufacturing of The P ken continuous measuring unit for the periodontal pocket (Medical equipment certificate number 231AMBZX00001000)

Other presentation

[Company strength]
We are good at designing and manufacturing printed boards. We have in place a production system that allows us to make proposals for improvement as well as respond to prototypes and remodeling. We accept orders for design and mounting of printed-circuit boards even for orders of a single prototypes. We can also procure parts. We provide completed products in an integrated production system covering unit assembly and wiring to control board assembly and wiring. We acquired a license to manufacture medical equipment and receive orders for production of medical equipment on a contract basis. We have enhanced technical capability related to assembly and repair of analysis equipment based on our many years of operation and can provide such repair service.



[Business description]
We are a professional group that mainly manufactures and designs electronic equipment. Recently there has been a shift to high-mix low-volume production or variable product and variable volume production, we endeavor to establish a production system that matches the trends of the times and provide products and services that satisfy our customers. We can handle orders for even a single sheet of substrate and can also procure parts.  We provide completed products in an integrated production system covering unit assembly and wiring to control board assembly and wiring. We are also a registered manufacturer of medical equipment and conduct commissioned production of medical equipment. We have enhanced technical capability related to assembly and repair of analysis equipment based on our many years of operation and can provide such repair services.



[Industry]
Assembly and manufacture of electronic equipment

[Strength of products/technologies]
We have established technology for a high variety of difficult mountings including high-density mountings for 0402 sized chips, flexible boards (FPC), and aluminum boards. We also conduct manual soldering and manual mounting of minute chips such as SMD0603 or 1005 and reworking of BGA and CSP. We have about 50 such orders every month. Technical training to develop excellent engineers is another focus of our company. Over 90% of our people engaged in soldering have the appropriate license.



[Representative's message]
We are a time-tested company established in 1962 in Chousen town at the foot of Mt. Fuji. Originally, we mainly manufactured electronic control devices and mass-produced printed-circuit boards. However, because of the recent rapid changes in the world, the trend is shifting to high-mix low-volume production or variable product and variable volume production. To cope with these new demands, we are currently trying to establish a production system that matches the trend of the times. It is our hope that small businesses like us have something unique that allows us to outperform major businesses. Our business activities also cover different types of work, such as dispatch of workers and provision of analysis equipment. With these wide-ranging operations, we always aim for continued growth and stability for our employees.



[Company structure for market development/overseas expansion]
Shizuoka prefectural government set up the Fuji Pharma Valley at a former high school site, next to Shizuoka Cancer Center, as a new base of the prefecture’s Pharma Valley Project. We are expected to see various rapid changes in the field of medicine and health, such as accelerated R&D efforts by relevant companies and accelerated participation of local companies in this field and their growth. We started to occupy the Project Support and Research Zone of the Fuji Pharma Valley Center in September 2016, set up a medical equipment team in our organization, and are planning to fully enter the medical equipment field. We intend to promote our R&D in the field of medical equipment by utilizing our strength, the compact and high-performance electronic board technology, while working together and sharing information with major manufacturers.



[Market share/Ranking]
We have no clear data, but we have received a lot of orders from major companies.

[Awards and media coverage]
[Awards]
Labor Minister’s commendation related to employment of people with disabilities; Labor Minister’s commendation related to excellent workers with disabilities (twice); Shizuoka Governor’s commendation related to fostering engineers; and Labor Minister’s commendation related to employment of elderly people

[Media]
TBS Mino Monta’s Asa Zubato, Shizuoka Asahi TV, Shizuoka SBS TV



[Authorization/Certification]
Acquired ISO 9001 and 140001 certification and are a registered manufacturer of medical equipment

[Intellectual property]
Utility model registration no. 3167520

[Main Clients / Business History (domestic)]
Company A (metronome), B (video recording system), C (injection molder’s LCD panel), D (assembly and repair of analyzer)

This company is recommended by the following support organizations.

Kanto Head Office, SMRJ
Inquiry

Similar Companies