Corporate
Profile

Failed to register as Favorite Page
Failed to cancel as Favorite Page
This page is already registered as a Favorite Page
You can't add your company to your favorites.
See Japanese corporate profile

Latest update： 30/11/2016 17:38:23

SGK CO.,LTD 

Photo-etching processing without burrs or distortion.

We offer precision parts manufacturing using photo-etching processing. An advantage of photo-etching is that it does not require any metal molds, and no burrs, warping, or distortion can result from the processing. Our company has produced parts from extremely small to large sizes (original fabric size of 600 × 1,600 mm), and we can support thicknesses between 0.03 and 2 mm.

Inquiry
Main image

Other presentation 

[Company strength]
We have two production sites: one for manufacturing a wide range of products in small quantities, and the other for mass production. 
We have handled from single-piece prototypes to super-mass production.
We have processed large parts (the largest having an original fabric size of 600 × 1,600 mm), so we can also process large-sized parts in addition to extremely small-sized parts.
Our available stock ranges from a material thickness of 0.03 mm to 2 mm. 


[Business description]
We offer precision parts manufacturing using photo-etching processing.
Our company provides a wide range of products for various applications, from functional parts to appearance parts.
We can provide post-processing (bending or surface treatment) after etching on consultation. 


[Industry]
Nonferrous metal machining

[Strength of products/technologies]
[Characteristics of photo-etching]
(1) No metal molds are necessary, which reduces the initial cost.
(2) No burrs or warping, which eliminates the necessity of secondary processing.
(3) Processing does not cause distortion, which makes it suitable for precision parts because no physical pressure is applied.
(4) Ultra-precision machining is possible with photoresist. 

[Representative's message]
Our company began in 1975 as the current label and nameplate manufacturer Sanyo Mark Co., Ltd., and was later branched out as its precision parts department. 
We have concluded deals with customers throughout Japan and around the world since expanding our production and sales sites.
I have sensed that there are still many people at exhibitions and the like who are not yet familiar with photo-etching processing. This is why I hope to further pursue our aim for global expansion. 


[Company structure for market development/overseas expansion]
Our sales department is the focal point for inquiries.
We have overseas sales representatives who have conducted business transactions with our customers abroad, so we have no problems dealing with import and export operations.
We can have meetings with potential customers in their own countries, in either English or Chinese.


[Authorization/Certification]
Obtained Green Partner certification and ISO 14001 certification.

[Joint research and development]
Kyoto University (development of parts for disaster prevention equipment)

[Factory (domestic)]
Osaka

[Transaction form]
Prototype and mass production processing, joint development, consigned processing. 

[Exhibition History/Information]
Mechanical Components & Materials Technology Expo (Tokyo/Osaka), INTERNEPCON JAPAN (Tokyo), general fairs for SMEs (Osaka), Korea Electronics Show 2014, Mechanical Components & Materials Technology Expo (Tokyo/Osaka) (scheduled), INTERNEPCON JAPAN (Tokyo) (scheduled).

This company is recommended by the following support organizations.

Kansai Head Office, SMRJ
Inquiry

Similar Companies

SANWA PLATING INDUSTRY INCORPORATED COMPANY
We perform integrated manufacturing from plating to almite processing. Grinding and plating lines allow us to reduce processing periods and perform quality control before and after surface processing. We draft proposals for the best film suited to requirements such as color,hardness, and smoothness depending on purposes from new trial manufacturing to mass production start-up.
Ito Seikan Kougyou Co., Ltd.
We are a can manufacturing company established in 1962. Our main customers are building equipment and plant equipment companies, as well as heavy industry manufacturers. Our services include the design and manufacturing of pressure vessels, towers and vessels, storage tanks, general cans, and welded pipes. We carry out integrated processing from design to assembly and installation. We possess equipment to manufacture pressure vessels using steel plates with a thickness of 4 to 16 mm. We support sizes to a maximum diameter of 3,500 mm, a maximum length of 12,000 mm, and pressure resistance of 63 kilograms per square centimeter. Most of our craftsmen are licensed special or ordinary boiler welders, and they are able to respond to various kinds of customer needs. We also handle design, manufacturing, and installation work for industrial machines.
SEKINE Manufacturing Co., Ltd
As a manufacturer, we do machining of all manner of shapes. We primarily manufacture high-mix low-volume, single-item, and prototype products used in field of energy (thermal power, hydraulic power, wind power, nuclear power, etc.) and the field of construction machinery. Furthermore, we have served customers in a wide range of industries. Our company was founded as a precision machinery processing manufacturer. Since then, with the support of our customers, we have manufactured and machined square parts, round parts, long parts, multi-division parts, and welded parts, in sizes both small and large. We hope to play a part in giving shape to your ideas.